LASER cutter/engraver kit for Bob’s E3/E4 CNC router

LASER cutter/engraver kit for Bob's E3/E4 CNC router
LASER cutter/engraver kit for Bob's E3/E4 CNC router
LASER cutter/engraver kit for Bob's E3/E4 CNC router
LASER cutter/engraver kit for Bob's E3/E4 CNC router
LASER cutter/engraver kit for Bob's E3/E4 CNC router
LASER cutter/engraver kit for Bob's E3/E4 CNC router

LASER cutter/engraver kit for Bob's E3/E4 CNC router
5W blue LASER cutter/engraver for Bob’s E3 and E4 CNC router. Easy to install and remove. Just secure the laser onto the mounting bracket with wingnuts, enable LASER mode, and it’s ready to cut and engrave wood, plastic, leather and more! Contact me to get a. If you already have a Dust shoe kit or Bit changer kit installed. 5W 445-450nm PWM TTL LASER unit with heat sink, circuit board and wired connection plugs. Shield sled panel made from laminated MDF (colors may vary). Sled bracket panels (3 pieces) made from laminated MDF (colors may vary). LASER quick-connect plate made from laminated MDF (colors may vary); this plate has 5 holes. LASER support mounting plate made from laminated MDF (colors may vary); this plate has 3 holes. 4x Acrylic shield panels. 7x 1 inch (2.5mm) corner braces. 2x 2 inch (5.1mm) corner braces. 2x M3 16mm pan machine screws. 2x M3 nylon lock nuts. 5x M4 12mm flat machine screws. 2x M4 16mm flat machine screws. 11x M4 8mm pan machine screws. 2x M4 25mm pan machine screws. 2x M4 30mm pan machine screws. 20x M4 hex nuts. 2x M4 wing nuts. ZIP file (105.7 MB). 28-page detailed instructions manual. Not included but necessary. Processing time may take 3 weeks. 5W 445-450nm TTL-modulated LASER can cut and engrave wood, plastic, leather and more. Easy to install and remove from the CNC frame. Acrylic shield with OD of +3, which can easily be inserted and removed. Router bit and collet remain accessible. Kit made in the USA. No drilling of extra holes in original router frame necessary. Includes the universal Sled bracket (which is also used for the Dust shoe and the Bit changer). Compatible with the Dust shoe for Bobs E3 and E4 CNC router. Compatible with the Bit changer for Bobs E3 and E4 CNC router. Compatible with the Tachometer kit for Bobs E3 and E4 CNC router. Contact me for more information and a video to see it in action. IMPORTANT: Safety and liability. BobsCNC E3/E4 CNC router frames are made of wood and are not designed for anything other than carving/cutting/engraving wood and plastics with the included router. It is therefore extremely important you understand the safety needs and use common sense when installing/operating a LASER. Powerful LASERs can burn through skin, cause blindness, and create toxic smoke and fire hazard situations when combined with flammable materials, including, but not limited to wood. By purchasing this product, you accept and take full responsibility of the hazards and any injury to yourself or others (human or animal) as well as property damage from fire or other disastrous accidents as a result of using this product. Under no circumstances can and shall Top o Arts or Dennis Van Hoof be held accountable for mishaps caused by this product. Never leave the LASER unattended when connected to a power source. Never look into the LASER. Use only in a well-ventilated area. Ing a fire extinguisher at hand, it is strongly recommended that you install a Safety main switchboard as an additional safety feature to your CNC setup when installing this product. Contact me for the instructions for this Safety main switchboard. The item “LASER cutter/engraver kit for Bob’s E3/E4 CNC router” is in sale since Wednesday, December 11, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “dennisvanhoof1976″ and is located in Union City, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • MPN: Does Not Apply
  • Brand: Top o Arts

LASER cutter/engraver kit for Bob's E3/E4 CNC router