15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven

15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven
15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven
15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven
15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven
15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven
15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven

15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven
15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven. WorkBee CNC Mechanical kit, WorkBee CNC Router Machine kit. The WorkBee CNC Machine is the result of years of experience, feedback. It has been designed. From scratch, and can accurately cut foams, woods, plastics and aluminium. To 0.2mm accuracy or better. Functional engineering parts, toys, signs or. Anything else that can be imagined, can be made on the WorkBee CNC. All Aluminum Extrusions have been Thread Tapping M5, so you can assembly them directly when receive them. The kits not including: Electronic parts as wire, Cable kits, Router Spindle, Drive board, Power supply, Stepper motors, working table, MDF panel etc and other Electronic kits. The WorkBee CNC Specs. 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard. The spoilerboard supports have two height configurations, these are the maximums for each configuration. ACME Lead Screws Or GT3 Timing Belts. Polycarbonate wheels on anodised C-Beam V-Slot Extrusion. NEMA23 175oz Stepper Motors (X, Y & Z). 0.05 – 0.10mm (Screw Driven) Or 0.10 – 0.20mm (Belt Driven). To clarify the Z Travel, this is not the max cutting depth or the travel range of the actuator. Z travel is the distance downwards it can travel before hitting the spoiler board supports. The WorkBee has two spoilerboard support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better to have the work piece as close to the Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm travel configuration. The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. In this case 54mm is maximum thickness of material that will fit on the machine. To calculate the max cutting depth for a chosen piece of material it is. Max Cutting Depth = Z travel – Material Thickness. For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max cutting depth would be. Max Cutting Depth = 54 – 30 = 24mm. This means with a 30mm piece of material it would not be possible to cut it the whole way through. The max thickness that can be cut the whole way through is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that could be cut the whole way through. And for the lower configuration the maximum thickness that can. Be cut the whole way through is 47mm. The main request we got for the OX was for a lead screw driven version. The WorkBee has been designed from the ground up to incorporate this and more. The WorkBee CNC Router can either by driven by screws, or by belts, it can be available up to 1500x1500mm in size. The WorkBee and OX use many similar parts. It comprises of the additional or different parts needed to build a WorkBee. It will require a complete strip down of the OX CNC Machine, and re-built as if the WorkBee was bought from new. It also includes some additional parts, and changes to the full kit version of the WorkBee. Even though they are used on the OX and WorkBee, new parts are supplied with the kit. These include the nylon nuts and GT3 Belts. This is a size for size conversion, It will need the same size machine as your current OX and also what drive version of the WorkBee (Belt Or Screw). Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Best quality products with great prices! Our aim is to provide an excellent services and products with amazing prices for you or your business. Our dedicated staff are happy to help Less than 24 hour response time. The item “15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven” is in sale since Saturday, November 30, 2019. This item is in the category “Computers/Tablets & Networking\3D Printers & Supplies\3D Printer Parts”. The seller is “katzaqualityproducts” and is located in Mainland. This item can be shipped worldwide.
  • Drive System: ACME Lead Screws Or GT3 Timing Belts
  • Product name: WorkBee CNC Mechanical kit
  • Item Type: Mechanical Kit/Hardware Parts
  • Model Number: RR-WB-01
  • Extrusion Frame Color: Sliver
  • Brand: REFORZELL
  • MPN: Does Not Apply
  • Bundle Description: As shown in the picture
  • Modification Description: As shown in the picture
  • Applicable Regions: As shown in the picture

15001500mm WorkBee CNC Router Machine Kit 4 Axis Engraving Mill Screw Driven